http://www.artwoo.com Returned search results for fusion splicers Copyright 2008 Sun, 23 Nov 2008 05:46:29 +0000 http://www.artwoo.com/rss/fusion+splicers http://www.artwoo.com/article/the-secrets-of-choosing-ribbon-fiber http://www.artwoo.com/article/the-secrets-of-choosing-ribbon-fiber#comments Thu, 03 Jul 2008 18:43:17 +0000 fusion splicersribbon cablesribbon fiberglass fibersquality ribbonfiber deploymentoptical fibers http://www.artwoo.com/article/the-secrets-of-choosing-ribbon-fiber
It's not the material cost. It's the labor! The introduction of fiber into the subscriber loop has increased the installation of short cable lengths with large number of splices. The speed at which the cables can be placed, spliced, accessed and reconfigured are becoming extremely important.

So the need for new technologies that promise to reduce the fiber deployment cost are very high. Bell companies are anxious on acquiring these new technologies and products in order to reduce their cost and push the broadband fiber optic network installation.

That is where the high fiber count ribbon cables come to play. These compact, UV epoxy bonded cables are comprised with high precision optical fibers and can be massed fusion spliced with minimum loss. These products have proven to be an excellent platform for FTTH deployment.

Mass fusion splicing machines from Japanese companies are a integrated part of this process. These fusion splicers are used by the fiber installation technicians to splice up to 24 fibers at a time with very low splice loss.

Ribbon Fiber Design

The most basic requirement for any fiber optic cable design is to protect the glass fibers inside from harsh environment. But for ribbon fibers, there is the other vital requirement: organize the fibers for optimum space efficiency and ease of mass fusion splicing and handling. And at the same, they must also be able to maintain the optical performance and mechanical reliability.

This means that ribbon fiber cables must pack high count of glass fibers, organize fibers precisely for mass fusion splicing, provide individual fiber identification, can be divided into single fibers or subunits, mechanically reliable and can be easily accessed from the end or midspan.

These requirements must all be met at the same time which makes the manufacturing of high quality ribbon fibers a tough task.

So fiber cable specialists concluded a excellent design. A color coded array of fibers bonded in a line with fiber coating material. Based on this fundamental structure, two designed emerged: edge bonded or encapsulated.

Edge Bonded Design

The edge bonded design basically bonds the fibers together with only materials in between of each fiber. This design is more popular in the United States. This design is 40% smaller than the encapsulated design.

Encapsulate Design

In encapsulate design, bonding materials extend well beyond the gaps between fibers, it actually encapsulates all fibers inside a rectangular looking tube. This design are more used in Japan.

Ribbon Fiber Mass Fusion Splicing

The time savings for ribbon fiber mass fusion splicing are so big that sometimes in the field individual fibers are ribbonlized to make mass fusion splicings.

However, the success of mass ribbon fiber splicing relies critically on the fiber geometry, the ribbon and the mass fusion splicer. High quality and consistent mass fusion splices can only be produced with ribbons that are made from fibers having stringent geometric tolerances.

These high quality fibers and ribbons are already commercially available. And they make the fiber deployment in FTTH projects a joy for the installers.Colin Yao is an expert on fiber optic technologies and products. Learn fiber furcation, fiber optic furcation, furcation tubing on Fiber Optics For Sale Co. web site.]]> http://www.artwoo.com/article/a-review-of-the-talk-fusion-income-opportunity http://www.artwoo.com/article/a-review-of-the-talk-fusion-income-opportunity#comments Thu, 02 Oct 2008 18:01:32 +0000 fusion productsincome disclaimerone hundred dollarsvideo emailfifty dollarsstarter packagewhat this means http://www.artwoo.com/article/a-review-of-the-talk-fusion-income-opportunity video email to other people. You make this video in a number of ways. You can use your web cam or your video camera or even use a pre-recorded video. Once you have made the video, Talk Fusion lets you edit it and add some special effects and then you can send it to whoever you like. The product is expensive. You can either buy a starter package for two hundred and fifty dollars or an Executive package for seven hundred and fifty dollars. That's a little pricey, with You Tube being free and all but then again YouTube doesn't pay you either.

Talk Fusion also has an income opportunity for people who want to make a profit off of this product. When you become a Talk Fusion seller, the first thing you need to do is set up your down line. Unfortunately the Talk Fusion income plan is binary. What this means is that your commission is based on an average of the profits made by both sides of your down line. So if you have one team that sells enough to earn you a commission of one hundred dollars and one team that doesn't sell anything at all, your commission check will only be for fifty dollars. They try to off play this by saying that your down line can be as long as you want it to be. After all, the more people you have selling under you, the more likely you are to have a larger commission check, and the more Talk Fusion products that will get sold.



Of course, you do earn some money directly by direct sales of Talk Fusion or by selling packages to the associates you hire. Every starter package you sell (which retail for two hundred and fifty dollars), whether it be to a customer or to a member of your down line, will earn you a commission of twenty five dollars. Every executive package you sell (which retail for seven hundred and fifty dollars) will earn you a commission of seventy five dollars.

One thing that Talk Fusion makes sure to do is to include an "Income Disclaimer" as part of its Opportunity site. The disclaimer basically lets potential sales associates know that income is not guaranteed and that being an associate with Talk Fusion is not a "get rich quick" scheme. Talk Fusion associates will need to put in some time and effort to earn any real money from the opportunity that is presented to them. That is, after all, the way it is with any business, but it was very conscientious of Talk Fusion to include that in their Sales Associate descriptions and information.

Talk Fusion looks like a very straight-forward sales opportunity. Unfortunately the binary down line commission is a little bit dicey. You might just be better off selling the Talk Fusion product directly to customers and not even bother to worry about creating your own down line.You can read our Unbiased, expert review of Talk Fusion from Brian Garvin and Jeff West at MLM Review Kings. This article may be used royalty free provided bio and links remain intact.]]> http://www.artwoo.com/article/how-do-fiber-optic-cleavers-precisely-cut-optical-fibers-in-a-flash http://www.artwoo.com/article/how-do-fiber-optic-cleavers-precisely-cut-optical-fibers-in-a-flash#comments Sat, 20 Sep 2008 01:36:23 +0000 doped fibersoptical fibersfiber fusiondiamond edgefiber tipstensile stresstransition area http://www.artwoo.com/article/how-do-fiber-optic-cleavers-precisely-cut-optical-fibers-in-a-flash
Simply put, optical fiber cleaving is the art of cutting glass optical fibers at a perfect 90 angle with a mirror like surface. This isn't as easy as it sounds.

Why do we need to cut the fiber at a perfect 90 angle at all? Well, this is required when we want to fuse two optical fibers together. Optical fiber fusion splicing always requires that the fiber tips have a smooth end face that is perpendicular to the fiber axis. The cleave quality is very important in determining the fusion splicing loss. This is especially true for specialty fibers such as erbium-doped fibers and dispersion-compensating fibers.

:: How do fiber optic cleavers achieve this?

The basic idea of optical fiber cleaving is first to scratch the fiber with a very hard diamond edge scribing tool, which induces a sufficiently large surface crack, then the fiber cleaver applies a tensile stress to the fiber which causes the crack to expand rapidly across the fiber cross section. Some other fiber cleavers apply the tensile stress first and then scratch the fiber with the diamond edge scribing tool.

:: How does the fiber cross section surface look like after fiber cleaving?

After cleaving, the fiber cross section typically consists of three regions: the mirror region, the mist region and the hackle region. The mirror region is first produced while the crack propagates across the fiber. We want the mirror region to be as large as possible. A perfect fiber cleaving will be 100% mirror region which will result in minimum fusion splicing loss.

But in reality, as the crack propagates more, multiple crack fronts are produced close to the end of the cleave and that region is called the hackle region. The hackle region is a rough surface area which will cause bad fusion splicing. We never want hackle region to exist.

Mist region is the transition area between the mirror region and the hackle region.

:: Factors that affect the fiber cleaving quality

There are two major factors which mainly determines a fiber cleaving's quality: the size of the initial crack and the applied tensile stress. In these two factors, the applied tensile stress plays a major part.

Ideally, the tensile stress should be low enough so the crack propagates and mirror region occupies the entire cross section of the fiber. When there are unacceptable amount of hackle region, in almost 100% cases, you should first adjust your fiber cleaver's tensile stress.

But on the other hand, too low tensile stress can cause problems of its own. The main problem is an angled fiber cleave instead of a perpendicular 90% cut. Angled fiber cleave is the other culprit causing bad fusion splicing in addition to cleaves with too much hackle region.

Another problem caused by too low tensile stress is that a large initial crack is required to make a cut. This large initial crack itself may be a reason for bad splicing.

Even the best fiber optic cleavers cannot guarantee a high quality cleave 100% of the time. Two other major problem with fiber cleaving is fiber lip and fiber chip. Fiber lip is a protruding piece of glass at the periphery of a fiber tip. If the lip is longer than a few microns than it exhibits a serious problem for a good fusion splicing. 99% of the time you should re-cleave your fiber once you see a fiber lip on the tip.

Fiber chip is the opposite of a fiber lip. Fiber chip means the a small piece of glass missing from the periphery of the cleaved fiber tip. Even though smaller chips usually do not cause any bad fusion splicing, larger ones can be a serious problem. Larger fiber chip causes surface tension to shear the molten glass at the fiber tip and thus distort the fusion splice geometry.

:: High precision fiber cleaver manufacturers

A vast variety of fiber optic cleavers are commercially available now ranging from high precision cleavers for manufacturing floor and laboratory use to low cost field fiber cleavers for field splicing applications. Major supplies include AFL Fujikura, Fitel, Tyco/AMP, Sumitomo, Corning Cable Systems and more.Colin Yao is an expert on fiber optic communication technologies and products. Learn even more about fiber cleaver, fiber optic cleaving tool and high precision fiber cleaver on Fiber Optics For Sale Co. web site.]]> http://www.artwoo.com/article/how-versatile-are-hair-extensions http://www.artwoo.com/article/how-versatile-are-hair-extensions#comments Thu, 13 Dec 2007 11:35:00 +0000 hair extensionshair conditiondamage haircolour changehair hairshort hairstreaks http://www.artwoo.com/article/how-versatile-are-hair-extensions Hair Extensions have grown to such a popularity that most celebrities are rarely seen without them. Hair Extensions are however not just limited to celebrities anymore, pretty much anyone can wear hair extensions provided they get the right type for their hair condition.

Clip in, temporary fusion, instant fusion, micro-wefts, pre-bonded and classic fusion are some of the most popular ways of attaching hair extensions. So just how versatile does this make Hair Extensions? The answer to this is very. Hair Extensions can not only be worn by a variety of different people but they can also be worn in a variety of different ways.

Are you tired of having short hair? Do you want to add length? Or maybe you want to add thickness/volume to the sides or the back of your hair due to your hair thinning or maybe a colour change is what your really after. No matter what your reason is, Hair Extensions can dramatically change the look and feel of your hair without causing any damage.

Hair Extensions have come a long way from when they were first seen back in the 80's. The way in which Hair Extensions are placed in your hair now means that no one can tell they are there. Your stylist will blend the extensions to look completely natural, meaning the only way in which anyone will know they are there is if you tell them.

Hair Extensions are the perfect way of testing different colours on your hair. By adding slices and streaks of bold colour to your hair via Hair Extensions you will be able to see what suits you best and will save your hair the damage of being bleached. Adding colour with Hair Extensions is also the perfect way of bringing that little bit extra to an outfit for a special occasion.

Another way that makes Hair Extensions versatile is they can be used to re-correct and blend in any damage that has happened to areas of your hair. Hair Extensions can be used on sections of hair that have started to thin; bringing you volume and thickness that looks nothing but natural.

As well as extensions that add length and volume to your hair it is also possible to get Hair Extensions that are known as Drawstring Ponytails. These are used when your natural hair is tied back in a ponytail. These drawstring ponytail attachments then clip onto the natural hair in your ponytail. These extensions can be used to hide bad hair days, keep hair looking good between washes and as a quick fix when you haven't got much time but want something different.

There is now such a wide range of colours and textures available when it comes to Hair Extension that there has never been a better time to invest in them. It is advised that if you are considering Hair Extensions that you get an appointment at your salon for a consultation so that the best type of extension as well as the best method to apply them can be agreed on by you and your stylist.

Once your Hair Extensions have been applied you can style them in a wide range of ways, whether you want to blow dry them straight or curl them with tongs, your options are limitless, you can even dye them if you feel like changing the colour of not only your extensions but your natural colour too.

When you have had your Hair Extensions applied at your desired salon your stylist will then cut and style your extensions to your desired look. Stylists also often use thinning scissors and hot razors to create a totally natural look. Helen Cox is the web master of Inanch, home of all your Hair Extension Needs. http://www.inanch.com/article/2/1/hairextensions-thetruthaboutinstantlongha= ir.html ]]> http://www.artwoo.com/article/dental-implants-types http://www.artwoo.com/article/dental-implants-types#comments Thu, 02 Nov 2006 02:27:07 +0000 dental implantsjawboneprostheticfusetitaniumfusionbone tissue http://www.artwoo.com/article/dental-implants-types dental implants available and the type chosen for a particular patient depends upon a number of factors. The size and condition of the patient's natural jawbone is probably the main factor and of course no two patients are the same. Some jawbones can be wide and deep and others narrow and shallow with many variations in between.

The most commonly used material used for implants is the inert metal titanium because it has been found to fuse well with live bone tissue in the jawbone. This fusion process is known as 'osseointegration'. The highly skilled work of inserting implants is carried out by a perodontist or oral surgeon who operates from within a hospital environment or more likely from a private clinic.

Root Form Implants

As the name suggests, root form implants resemble the root of a tooth but are formed like a self-tapping screw which gives it a good surface area for maximum fusion to the living bone. It is inserted by screwing the implant into a hole previously drilled into the jawbone or into the cavity left from an extraction. The implant then acts as a root or foundation for a new prosthetic crown. However, this type of implant can only be used if there is sufficient width and depth to the jawbone. Sometimes it is necessary to graft additional bone to the jawbone before dental implants can be considered.

Plate Form Implants

If there is insufficient live bone structure because the jawbone is too narrow or not deep enough then plate form implants is another option the perodontist will consider. This takes the form of a long narrow strip of titanium which is inserted between the jawbone and the gum and will fuse with the jawbone giving a foundation for a number of new prosthetic crowns if required. Sometimes it may also be necessary to graft additional bone if the jawbone is in a poor condition before the implant can be inserted.

Subperiosteal Implants

Subperiosteal implants are an option used where the condition of the jawbone is such that an insert is not possible and a bone graft is not feasible. The jawbone is exposed and a mould impression taken from which the subperiosteal implant is created and placed on top of the jawbone under the gum and fusion takes place between the jawbone and the subperiosteal implant. Sometimes a CAT scan is taken of the patient's jaw which then allows the subperiosteal implant to be made without first exposing the jawbone which would otherwise require a two stage surgical operation.

Artificial Bone Substitute

This is a synthetic material which has similar properties to natural bone and will cling to the live jawbone and grow like real bone. This type of implant is usually used as a foundation for dentures.

Endosteal Implants

Endosteal implants are similar to subperiosteal in that they are moulded or shaped to fit in a cavity in the jaw rather than sit on top of the jaw.

This article is intended only to give a very basic outline of the types of dental implants considered by the perodontist or oral surgeon. Sometimes a variation or combination of the types described may be used but it is important that if you are considering this type of dental treatment that you consult your dentist or a perodotist to establish what is the most suitable type of treatment for your unique situation. For more information on Dental Implants visit http://www.dentalimplantsite.ws/ ]]> http://www.artwoo.com/article/business-process-outsourcing-bpo-global http://www.artwoo.com/article/business-process-outsourcing-bpo-global#comments Tue, 18 Apr 2006 11:50:10 +0000 http://www.artwoo.com/article/business-process-outsourcing-bpo-global 'Globalism' Sweeps The World

Increasingly the world of business is coming together to tackles people/business and political issues. This increased focus on collaborative synergies is reshaping corporate strategies and even transforming competition...as even competitors at times come together to collectively grow the markets/lobby for concessions from governments or form business interest groups. All this is the new face of globalisation -- called 'globalism'.

Just like fusion releases limitless energy, business fusion through the spread of globalism is releasing unlimited opportunities for growth today and tomorrow. Outsourcing is one of the trends of this globalism as business come together on a shared expertise basis for jointly adding lasting value to their mutual bottom-lines. Outsourcing has also given rise to many new ways of collaborating - like the rise of collaborative marketplaces/portals on the web where outsourcing people eonverge/meet viz. service providers, service seekers, corporate, thought leaders, CEOs, CFOs, Project Managers, Transition Experts, freelancers, consultants, service seekers, BPO analysts/experts/advisors.

BPO and Global Fusion

Today's consultative BPOs are a unique example of 'global fusion' where different cultures and processes 'fuse' to release an enormous energy viz. worker enthusiasm and significantly higher revenues too. Many BPO employ expatriate multicultural staff from different countries to deliver integrated BPO i.e. both the contact center as well the IT needs of its global clients. This leads to immense gains to both service providers as well their workforce as people from different cultures enjoy working together towards the same business goal and there are immense cross learnings for everyone in terms of process innovations and cultural bonding.

The other fusion is at the outsourced business process level as it seamlessly integrates with client process and global operations. This is a process of continuous improvement as the outsourcing vendor is continuously re-inventing its operational procedures by introducing innovative processes that significantly enhance revenues of its clients while saving millions too. Being domain focused enables outsourcing project managers to offer consulting to its clients (as it is able to view the clients' customer needs more objectively/closely) that help them align their competitive strategies more effectively.

BPO vendors are then able to charge their its clients on the value they delivers rather than the usual model of effort based costing. This way the clients do not have to pay for any service/personnel in-efficiencies (as is the case with the usual effort based pricing practiced by other BPOs, where the costing depends on the number of seats/people allocated to a process).Thus client engagements at BPOs consistently grow up the value chain and this business fusion is a great win for clients, great for employees, great for outsourcing service providers and even greater for India as a trailblazing destination for BPO innovations!

Global Transformations

Companies who outsource are those who experience higher pressure to provide global integration. According to a recent report, rising majority of companies currently use outsourcing as a transformational vehicle. A key feature of adopting business process transformation through a BPO model is that the process improvement stages can often be funded by the savings released in the initial outsource , particularly if this involves labour cost savings via a low-cost off shoring location.

The outsourcing initiative is now seen to be more strategic. The business reasons for outsourcing appear persuasive, and the experience to date revolutionary to say the least. Apart from technology optimization, the other outsourcing -improvement levers are: outsourcing economies of scale, labour arbitrage, people-skills optimization and continuous process improvement.

BPO providers with core skills in technology and systems integration take the risk out of implementing automation, and their investment in IT infrastructure is an inherent benefit of BPO. Both CEOs and CFOs are looking for ways to drive benefits beyond cost issues to transform overall corporate performance, competitiveness and shareholder value. For them, BPO is a fact of good business life. It continues to grow and make its mark as a prime mover in cutting costs and generating efficiency. Parveen Panwar is founder of Go4outsourcing.com. http://www.go4outsourcing.com is an online freelance marketplace to connect service buyers with freelancers/service firms. Freelance web developer, freelance programmers ]]> http://www.artwoo.com/article/hammertoe-surgery http://www.artwoo.com/article/hammertoe-surgery#comments Tue, 30 Jan 2007 00:27:09 +0000 hammertoe surgeryhammertoestoe bonestendonsfusion surgerytreatment optionarthroplasty http://www.artwoo.com/article/hammertoe-surgery Hammertoe surgery may be a treatment option if you have a severe hammertoe.

A hammertoe is a contracture of the toe due to a muscle imbalance between the tendons on the top of the toe and the tendons on the bottom of the toe.



There are two types of hammertoes, a flexible hammertoe and a rigid hammertoe.

Flexible hammertoes are less serious because they can be diagnosed and treated while still in the developmental stage. Flexible hammertoes are still moveable at the joint.

Rigid hammertoes are more serious and can be seen in patients with severe arthritis. In rigid hammertoes the tendons have become tight and the joint misaligned and immobile making surgery the course of treatment.



With hammertoe surgery there are several types of surgical options depending on the location and extent of the problem. The first option is arthroplasty. With arthroplasty, a portion of the joint is removed and the toe is straightened.



The second surgical option is fusion. With fusion surgery, the cartilage between the two toe bones is removed and the bones are fused to form one longer bone.



The third surgical treatment option is to have an implant put in the toe. With this surgery a portion of the bone is removed and replaced with an implant.



After hammertoe surgery some swelling, stiffness and limited mobility can be expected for as long as eight to twelve weeks. To help reduce swelling it is important to keep the foot elevated and apply ice. Most physicians will also recommend that a splint or surgical shoe be worn for the first two or three weeks after surgery. This will help to protect the foot and help to dispense body weight allowing the body to heel.

Some potential complications from hammertoe surgery are infection, swelling and possibly deviation of the toe. If a lot of bone is removed the toe may be a bit floppy. This will last for about seven weeks but generally will not be permanent.



Hammertoe surgery is one of the most successful procedures for surgeons today. Over 300,000 hammertoe surgeries are performed each year with few complications. Most patients are able to resume their daily activities without significant interference. For more important information on foot pain be sure to visit http://sore-foot-remedies.com where you will find advice and tips on common foot pain causes such as hammertoe, toenail fungus, and other articles that you can view at http://www.sore-foot-remedies.com ]]> http://www.artwoo.com/article/top-10-cars-that-have-cheap-insurance-rates http://www.artwoo.com/article/top-10-cars-that-have-cheap-insurance-rates#comments Sat, 18 Oct 2008 11:15:22 +0000 ford econolineford fusiongmc sierrabuying a new cargas mileagechevrolet impalachrysler town http://www.artwoo.com/article/top-10-cars-that-have-cheap-insurance-rates Buying a new car is one of the most expensive bills you will have to pay besides your house (most likely). To make sure you get the best deal on your car you have to key in the insurance rates as well. There are many vehicles on the market that are known for their affordable insurance rates. If you want the most for your money, you may want to consider one of the cheapest insurance rate vehicles. Not sure what they are? Keep reading and you may find out some of the best deals for your future cars.

Top 10 Vehicles that have the Cheapest Insurance Rate for 2008:

1. Chrysler Town and Country -- The Town and Country is the cheapest vehicle to insure as of 2008. The average premium price for this vehicle is only $940 a year!

2. Ford Escape -- The Ford Escape has been a major hit for the year 2008. It has come a long way for its gas mileage and now is the second cheapest vehicle to insure for 2008. To insure a Ford Escape for the whole year you will pay an average price of $1,022 per year.

3. GMC Sierra Pickup - Are you a truck lover? If so, you don't have to panic or worry about high insurance rates. The Sierra has a great insurance rate of $1,026 per year.

4. Chevrolet Impala -- The Impala is a great family sized vehicle with an awesome price of $1,091 per year to insure.
5.Ford Econoline Club Wagon -- Do you need a great amount of space for a job or company vehicle? If so, that's not a problem. You can insure this vehicle for just $1,119 per year.

6. Ford Fusion -- This vehicle is a great vehicle for college students and has been known to be a huge sell for the past year. You can insure the Ford Fusion for just $1,133.

7. Ford F-Series Pickup -- Like big trucks? Have a company that needs a truck to help get the work done? If so, no problem. You can insure the Ford F-Series for as little as $1,156 a year!

8. Honda Civic -- The Honda Civic is a very popular vehicle. To make things even better the Honda Civic can be insured for only $1,163 a year.

9. Toyota Camry -- The Toyota Camry has become a major hit this past year. It is a great family vehicle that gets an awesome gas mileage. To add to its excellence you can insure the Camry for just $1,165 a year.

10. Toyota RAV-4 - This beautiful SUV can be insured for just $1,165 a year!

As you can see there are many vehicles on the market that have amazing insurance rates. Looking for the best prices out there? Be sure to include the insurance costs when looking so you don't shock yourself in the end! Consider some of the vehicles listed and get the best deals out there!Find a gas card and more of Tom's work at FINDgascards.]]> http://www.artwoo.com/article/what-you-should-know-about-aluminum-welding http://www.artwoo.com/article/what-you-should-know-about-aluminum-welding#comments Fri, 09 Nov 2007 23:20:00 +0000 aluminum extrusionaluminum weldingcapillary actionveegroovecoalescenceextrusion process http://www.artwoo.com/article/what-you-should-know-about-aluminum-welding Aluminum extrusion and aluminum welding go hand in hand. Extrusion allows for a variance in the thickness of the wall in whatever aluminum object that was created by the extrusion process. Because the wall can have a varying thickness throughout the object, that object can have something called a vee groove.

What is a vee groove? A vee groove is a V-shaped formation in a piece of metal. The vee groove facilitates performance of a welding process. The welding process is used to create a bond between two different metals.

If a vee groove exists in an aluminum part, that aluminum part can be welded to a different metal part. Aluminum welding is used to melt one metal part, a part that should be joined to another metal part. The heat from the welding device creates a small pool of liquid. That liquid forms a puddle in the vee groove.

The hot liquid is used to bond two different metals. The hot liquid in the vee groove coalesces around a section of each of the two different metal parts. Once the molten material has hardened, the metal objects have been fused together.

Coalescence permits the joining of aluminum and a second metal, but it is not the only scientific property that can aid formation of a metal to metal bond. Not every fusion of aluminum and a second metal has resulted from aluminum welding. Sometimes that fusion is produced by a process called brazing.

Brazing relies on the properties of capillary action. As in aluminum welding, in brazing a section of metal must be heated to the point where it enters a liquid state. That molten metal is then distributed on the close-fitting metal parts. After the liquid metal hardens, then the metal parts are firmly fused together.

Both aluminum welding and brazing can call for exposure of metals to a good deal of heat. Sometimes a metal worker does not want to expose a piece of metal to very high temperatures. If that piece of metal should be joined to another metal, then what process can the metal worker use?

When a metal worker faces the above-mentioned problem, then he or she needs to use a process called soldering. Soldering takes advantage of the low melting point of one metal, a metal different from the two metals that need to be joined together. Liquid from a metallic substance with a low melting point is used to create an adherence between two different metal parts.

Aluminum alloys do not always need to be joined by welding, brazing or soldering. Sometimes aluminum alloys have been held together by adhesive bonding. Sometimes mechanical fasteners clasp onto two connected, aluminum alloys. Sometimes bolts, nuts or rivets are used to join together two different aluminum alloys.

All of the above methods create a strong metal to metal bond. All of the above methods benefit from the tensile strength of aluminum. All of the above methods use to advantage a characteristic of the extrusion process.

Both aluminum welding and the other metal joining methods put demands on an extruded metal object. Still, an object created by the extrusion process can be made thickest at the points where it receives the most pressure. Alfiniti provides aluminum tubing and aluminum extrusion and aluminum tube, aluminum tube bending, aluminum casting, aluminun anodizing, cnc machining and aluminum welding. You can visit our website at: http://www.alfiniti.com ]]> http://www.artwoo.com/article/spa-goers-discovering-more-rest-organic-inspired-products-and-infused-treatments-at-their-local-spas http://www.artwoo.com/article/spa-goers-discovering-more-rest-organic-inspired-products-and-infused-treatments-at-their-local-spas#comments Wed, 08 Oct 2008 09:29:30 +0000 relaxing spa treatmentsmental wellbeingsleep apneaspa industrynutrition habitssleep studiesfeature programs http://www.artwoo.com/article/spa-goers-discovering-more-rest-organic-inspired-products-and-infused-treatments-at-their-local-spas spa industry is keen to stay on the cutting edge of its services -- fulfilling what their clients demand -- sometimes before the client even realize it's in demand. As more Americans incorporate physical and mental wellbeing into their daily lives, the spa industry is already poised to show them the most effective methods to a balanced life.

In fact, spas are working hard to educate the American consumer on the basics of healthy living: stress management, nutrition and exercise. On average, half of the country's spas offer programs based in nutrition and exercise; nearly half feature programs in healthy eating; and just over a quarter offer programs aimed to educate their clients about obesity and weight-loss.

Another emerging trend in the road to wellbeing is the issue of sleep. Studies continue to emphasize the dire need Americans have for quality rest. The country's populace is running on less of it than ever before. Quality sleep has shown to have a positive effect when it comes to issues such as weight loss, productivity and physical health. And while spa-goers have long embraced programs that will improve exercise and nutrition habits, they are now also requesting help for achieving a good night's rest. Spas are in the position to answer that call by developing extra-relaxing spa treatments, lounges designed for post-treatment naps, and environments that encourage a restful sense of being with low lights and sound. This growing need also has properties adding sleep directors and specialists to their staff who can help those who suffer from sleep apnea and other similar disorders. Now a good siesta may only be as far away as the neighborhood spa.

In addition to adopting a healthier lifestyle, more Americans are also adopting a green philosophy of life. Therefore, many are examining the spa industry's commitment as well. They are looking at a property's eco-friendliness, natural and holistic approach to their business. Issues range from practices such as the amounts of water used to clean towels to the use of locally-grown, organic vegetables. As a result, nearly three-quarters of U.S. spas indicate they are adopting environmentally sustainable practices.

These practices also apply to the products used and endorsed by a spa. Clients are seeing more organic products made from plants, herbs and mineral essentials. Anti-aging foods and organic products are touted for their effectiveness in enhancing one's appearance as well as feeding the epidermis. In addition, spas are incorporating treatments that highlight indigenous plants that highlight the natural world in which the spa is located. These kinds of practices are eagerly embraced by consumers who value a spa's holistic commitment to its guests and the planet.

Fusion is a term that has found its way into cuisine, decorating, and now the spa. The idea behind fusion is to take two effective elements and combine them for a more powerful result. But for an industry bent on innovation, it's not really a new concept. For instance, Watsu was developed by a California therapist who combined Zen shiatsu with water. The term "wellness" came about by those who combined philosophies of well-being and fitness. Other examples of fusion include yogalates (yoga and Pilates) and Kinesis (mind and body exercises). As fusion continues to become more mainstream, spa-goers are seeing more creative combinations that include massage and sound therapy, the use of Jacuzzis with light therapy, and facials that incorporate breathwork.

In an industry that seeks to keep ahead of the curve, tomorrow's unfamiliar trends quickly become today's mainstream treatments. All hold one goal in mind -- to provide the essential steps to achieving one's best health yet.Geologix Inc. manufactures products using a proprietary formula featuring 34 natural minerals contained in the ancient sea water from the famous Michigan Basin -- a concentration of minerals higher than that found in any known body of water in the world. Mineral Essentials focuses on spa, skin care, and massage products to moisturize and provide anti-aging protection for great skin. Mineral Essentials]]> http://www.artwoo.com/article/working-walking-and-the-web-how-to-surf-and-get-fit-at-the-same-time http://www.artwoo.com/article/working-walking-and-the-web-how-to-surf-and-get-fit-at-the-same-time#comments Mon, 30 Apr 2007 16:30:01 +0000 used fitness equipmenttreadmilllaptop trayemailfitness routineebaysteel casters http://www.artwoo.com/article/working-walking-and-the-web-how-to-surf-and-get-fit-at-the-same-time email, planning vacations, researching that new car you're thinking of leasing=85 they all take time and it's more than likely that by the end of the night, something didn't get done.

Best solution: Maximize your efficiency by multi-tasking.

Set the stage for success. Decide first what sort of fitness routine to commit to. According to the U.S. Surgeon General and the American College of Sports Medicine, the average adult should engage in a minimum of 30 minutes of moderate-intensity physical activity up to seven days a week. Translation? Walk, bike, or cross-train for a half hour every single day. Once you've decided what kind of exercise you're going to do, purchase or lease the fitness equipment you need to accomplish your goal. Used fitness equipment, because many people buy the equipment and never use it, is usually a pretty good bargain. Try ebay, classifieds in the newspaper, or even watch for commercial gyms to upgrade their equipment (many replace their cardio equipment every two years).

Create a compatible work station. Since you probably won't be able to set up a treadmill next to your desk, bring the desk to the treadmill! We suggest purchasing a mobile, compact fusion cart to support your laptop or monitor and using that when you're on the treadmill. One of the best we've seen online is the Laptop Fusion Cart from Versatables.com. At $299.00, it includes a height-adjustable laptop tray, steel casters for easily mobility, and an additional platform for a printer, keyboard, or water bottle.

Plan your half hour to maximize results. During your day, organize your tasks so that you can reserve your "less focused" activities for work out time. For example, instead of wasting time during your work day perusing the internet in search for a birthday gift for your brother, save that task for when you're on the treadmill. By completing the more important tasks during work time, you'll be more efficient both on and off the treadmill.

Use your computer to make your workouts enjoyable. If you don't want to return emails or surf while you're walking, download some upbeat music or a podcast to your laptop. Or pop in a dvd you've been meaning to watch (six workout sessions a week equals two movies you wouldn't otherwise have time to watch). Or sign up for a happy-neuron.com account and exercise your brain while you exercise your body! Regardless of what you choose to do on your laptop=97work, shop, relax, play-- the goal is to get fit without getting behind. Finding http://www.versatables.com at a great price is hard. So make sure you shop with the best VersaTables! We carry all of your office needs from desks to http://www.versatables.com/pages/cartsmain.phps. Visit our website. ]]> http://www.artwoo.com/article/between-windows-and-unix-interlacing-hosting http://www.artwoo.com/article/between-windows-and-unix-interlacing-hosting#comments Tue, 20 Mar 2007 01:32:01 +0000 graphical user interface guimicrosoft frontpageunixfrontpage microsoftmicrosoft applicationsmicrosoft accessflash shockwave http://www.artwoo.com/article/between-windows-and-unix-interlacing-hosting UNIX are in celebration two divergent systems and of roaming we are referring to computer systems. A web lessor uses computers, (we shall mention to them as servers, good computers, but sometimes larger) to owner websites, and all computers voracity a operating system, thus Windows and UNIX are the operating system.

The Windows used is normally Windows NT or 2000 and of tramp as you prize Microsoft charges for it's software, tide UNIX is an go ahead prelude operating system, this factor that the hep creators of the practice have habituated advancing the rights and anyone can use it, change, improve or do anything they want with, free of charge.

>From this we instant have to wanted differences, Window hosts are additional treasured and UNIX is further reliable, owing to it as been better by thousands of unascertained people. Most mediocre you are enumeration this in pretentiousness of your computer which much usual is operates on a Windows XP, have you noticed that it sometimes, it freezes, and the lone guess is to restart it? UNIX is famously further stable, robust, time-tested, handy platform for a web server.

But Windows servers have also it's stupendous sides, they are consistent with Microsoft applications, and really aid Microsoft FrontPage, Microsoft Access and MS SQL, they also instance advance-programming environments and mood congenerous as Active Server Pages (ASP), the http://ASP.NET framework, Visual Basic Scripts, MS Index Server, Macromedia's and Cold Fusion.

Windows operating proceeding crave painless or no existence in lacework evolving to discharge strange temper big idea very quickly because of better graphical user interface (GUI) Software such as Microsoft's FrontPage is specially developed for the webmaster to decrease the website development time and efforts.

Lets header grant and to UNIX, they aid FrontPage, Flash, Shockwave, Real Audio/Video, Cgi Scripts, Perl, PHP, SSH (Secure Telnet), MySQL, Web-Based Control System, Anonymous FTP, Web Site Graphical Statistics, Web-Based Email System, Miva/XML, Cold Fusion Perl, JAVA, PHP, C, Cand#43;+, Miva, Shell Access and various revealed phenomenon of character drink in Telnet and SSH that provides lots of right and freedom in managing file and directories, but some of this require advance knowledge of Unix commands in order for you to customize the scripts to match your website needs.

Because of the character of UNIX, (open source) and the commonality who rapture it, qualified is on the WWW freely available software and scripts, besides bringing the market price down. The author writes about a number of different topics visit http://www.DISCOUNTHOSTREVIEW.COM ]]> http://www.artwoo.com/article/sealing-stainless-steel http://www.artwoo.com/article/sealing-stainless-steel#comments Sun, 10 Feb 2008 04:15:02 +0000 stainless steel bolttypes of metalsaluminum sheeteveryday goodscook stoverivetsingle day http://www.artwoo.com/article/sealing-stainless-steel single day, which defines steel as being a very important material used in the construction of many everyday goods. Depending on the type of product depends on whether or not stainless steel needs to be sealed. Items such as countertops do not have to be sealed because they are usually one large slab placed upon a base.

However, there are certain items or even components of items that must be sealed. Take the cook stove, for instance. The cook stove may actually be made up of two different types of materials such as aluminum and stainless steel. These two metals have to be fused together in some way. Even certain components such as screws need to be altered in order to work properly with both types of metals and keep the appliance intact. There are various methods in which stainless steel is sealed and there are times when it needs to be completely sealed, partially sealed, or not sealed at all.

Aluminum and stainless steel tend to be two metals that are commonly used together. Certain components may require sealing and these components can be sealed with a corrosion resistant primer. Instances in which this sealing may occur between steel and aluminum are:

=95 Sealing stainless steel hinges to anodized aluminum parts =95 Sealing a stainless steel bolt to inside an anodized aluminum part =95 Sealing a stainless steel or aluminum rivet in a primed aluminum sheet =95 Sealing a stainless steel insert into an aluminum part =95 Sealing a stainless steel bearing into an aluminum part

Heat sealing

Heat sealing is another method used to seal stainless steel. This method uses heat to seal two pieces of a material together at the place in which the pieces connect. The temperature in which these materials are heat sealed reach the temperature at which fusion occurs, which also involves a certain degree of pressure.

Thermal sealing

In instances where temperature may remain constant because of a rotating wheel, the sealing is considered to be thermal sealing. The remainder of the process is the same of heat sealing because temperatures reach the point of fusion in which the two pieces of steel fuse to each other, making a very strong bond between the two.

Impulse sealing

Impulse sealing involves the heat being applied to the steel by resistance elements, which are applied to the project when the metal is relatively cool and then heated at a rapid rate. It is through this method that simultaneous cutting and sealing can be performed.

Dielectric sealing

Dielectric sealing uses radio frequency waves to induce heat within the steel. However, if ultrasonic vibrations are used in sealing, this is called ultrasonic sealing.

It is obvious to see that there are many methods of sealing. Some may even prefer to call it welding. Everyone has most likely seen someone with a welding torch and a face mask fusing together two pieces of metal. In this case, two pieces of stainless steel can be sealed together to form many types of objects and structures. Nevertheless, the next time you see two pieces of stainless steel forming a 90 degree angle, you will know how it was probably done. Our pre fab metal buildings are easy to assemble, using simple building tools and easy to follow instruction manuals. http://www.futuresteel.com ]]> http://www.artwoo.com/article/all-about-scratch-off-systems http://www.artwoo.com/article/all-about-scratch-off-systems#comments Mon, 27 Oct 2008 02:01:24 +0000 scratch off cardstenth anniversaryprepaid cardsmaximum qualityindex cardpracticalityingenuity http://www.artwoo.com/article/all-about-scratch-off-systems ingenuity and practicality of the scratch off cards such as the ones sold for the lottery, prepaid cards of all sorts and certain promotional cards with trivial prizes, Scratch Off Systems is the supplier for you. They supply many scratch off cards as well as the printing used for the cards and the security labels. It is a relatively new privately held company, which began in 1998, this year the company celebrates it's tenth anniversary. Since Scratch Off Systems is a privately held company, the stocks that are owned by few people are not being traded publicly to the stock market. All is well however since the owner is still working vigorously against his company's competitors daily.

Scratch Off Systems has a wide variety of attractions that sets itself on a higher pedestal against it's competitors such as the many award-winning teams that the company has produced. These teams are comprised of the most artistic and ambitious workers who flaunt their creativity by creating newer and more aesthetically pleasing layouts for their products. They also meet the demands of the customers by custom making the layouts that are sent to them. To ensure the maximum quality of their created goods, Scratch Off Systems is known for it's in-house production as opposed to outsourcing.

Going more in depth concerning the options one may receive when purchasing the products, different sizes is an option, from the credit card size to a simple three by five index card size to a four by six card as the largest available size. Quantity is also an option and while they offer around the same minimum amount as other competitors which is five hundred, Scratch Off Systems allows the printing of up to one million copies. Customization and wrapping for delivery also becomes available to those who are interested in having a unique product. When it comes to the security labels, which are the shiny latex covers one must scratch off to obtain a prize, many options also become available such as the holographic labels or the simple latex labels. Normally, it takes a while to print these on cards in bulk but with the fusion label series, a customer is allowed to place up to 80,000 scratch off labels on a single roll. This fusion label series can be run for hours without having to change the roll. Scratch Off Systems even offers wafer seals for festivals and games as well as magnetic stripes for credit cards.

Many of the examples and samples of the products that can be found being manufactured and supplied by Scratch Off Systems can be found in the main website. Many testimonials can be found there as well. This site mainly can be used to contact the workers who would be more than willing to answer the questions of curious customers. According to the site, postal mail, e-mail and telephone are all valid ways to contact the company. Visit the site and purchase your next set of scratch off cards the next time you need them.Ready to hit the big one? Chris Malcolm shows YOU how to put the odds in your favor. Learn how you can use scratch off systems to put the odds your favor via Chris's FREE E-Course on scratchers. Visit http://www.ScratchOffSecretsRevealed.com for more info!]]> http://www.artwoo.com/article/making-presentations-people-want-to-see http://www.artwoo.com/article/making-presentations-people-want-to-see#comments Sun, 21 Oct 2007 11:25:01 +0000 laptop projectoremailafraid to askslidesintriguing presentationspower point presentationluckily http://www.artwoo.com/article/making-presentations-people-want-to-see intriguing presentations. The days of boring slides and droning speakers are over. With the widespread use of PowerPoint and the ease of making colorful, interesting slides with movement and sound effects, it is expected that you will make a fabulously engaging presentation whether it's in a classroom, a boardroom, or at a trade show.

Here are some tips on how to make a terrific slide presentation.

First, be prepared. Make sure you have a laptop, a projector, and a projector cart ready to go. We recommend the Fusion Laptop Projector Cart from Versatables. Many hotels, universities, and businesses have one=97so don't be afraid to ask if they do when you're getting ready to make the presentation. The Fusion Laptop Projector Cart allows for easy projection and control of the laptop from one mobile unit. If they don't have one, you may need to make other arrangements. If you aren't using your own laptop, bring your presentation on a flash drive and email it to yourself as well. Just in case the flash drive doesn't work, you'll be able to access your email on the laptop (most places now have Wi-Fi) and download it directly to the laptop you'll be working from.

Second, bring handouts of your slides just in case. I know of a woman who went to give a power point presentation and the university's projector wasn't working. Luckily, she handed out the handouts she brought and the show went on. She looked like a star for being prepared when the university wasn't.

Third, don't overdo it. Too many graphics, too much color, and too much sound can all negatively impact a presentation. You want the means of the presentation to enhance the subject you're presenting=97not overpower it. Pick one color scheme and stick to it. Avoid the swirling graphics and stick to simpler ones. Don't include a million examples of clip art or decorative photographs. As you create the slides, make sure the information is presented in a clear, logical way. Then look at each individual slide and ask if there is anything that could be added to visually enhance the viewer's understanding of the material. A chart? A graphic? A photo? If the answer is no, don't include one. If it's yes, think long and hard about which graphic achieves your goal of enhancing understanding before adding it. The problem with many presentations is that they seem amateurish because the presenter went overboard decorating his/her presentation with graphics that distract more than they enhance.

Fourth, pay attention to time. If you can convey the same information in eight minutes instead of twelve, why wouldn't you? Everyone's time is precious and attention spans are short. If you're clear and concise about what you want to get across, there may not be a need to give lots of convoluted information and scenarios. Stick to one clear example that illustrates your point and applies to the people you're presenting to. Does your business need computer wall mounts http://www.versatables.com/pages/wallmountmain.php? Or wouldn't it be great if your IT department had computer carts http://www.versatables.com/pages/sittostandmain.php to setup new employees. Visit Versatables.com today. ]]> http://www.artwoo.com/article/golf-balls-what-type-should-you-buy http://www.artwoo.com/article/golf-balls-what-type-should-you-buy#comments Fri, 27 Oct 2006 00:27:07 +0000 golf ballsgolf ball compressionshelvestake a deep breathgolfersfusiongame http://www.artwoo.com/article/golf-balls-what-type-should-you-buy golf balls? It may seem like the easiest task at hand as you walk from your car, through the parking lot, and into the store. You're just there to pick up some good old golf balls for your game later that evening. You pass a nice looking golf shirt, some golf shoes, and then you see them. You stop dead in your tracks.

The shelves... upon shelves... upon shelves of golf balls seem to stare blankly at you. And they all seem to be screaming at the same time: Long distance, More spin, More control, Hi-spin, Raw distance fusion. Raw distance fusion? you ask yourself.

Ok, time out! It's time to take a deep breath and relax. No, the golf ball world does not want to make you have a panic attack before you even get out on the green! But, it is no question that buying golf balls, even for some experienced golfers, can be a tad bit confusing. Let's take a closer look at the basic types of golf balls on the market today and perhaps this will help you in your next endeavor into the store!

Basic facts about golf balls: To begin, there are some specifications that all golf balls must meet in order to be sold for golfers. First, all regulated golf balls have a size limit. This limit is 1.68 inches in diameter. And, a golf ball cannot be any heavier than 1.62 ounces. The only other specification that must be met on a golf ball is it's shape - yes, it must be round! No square, rectangle, or triangle balls allowed.

The importance of compression: Quite simply put, the compression of a golf ball will give you a certain feeling from having hit the ball - it will either feel solid or not solid enough. The higher the compression of a golf ball, the more solid it will feel to you. Typically, golf ball compressions are rated between 80 and 100 - 90 being the most common. What type of golf ball compression you favor is completely up to you. In the game of golf, no two players are the same.

Ball coverings: Golf ball coverings come in two main types of materials: Surlyn and Balata. First, a golf ball covered with the material Surlyn cannot be scuffed or broken. This is because Surlyn is a manmade substance that withstands a great amount of pressure and outside damage. A golf ball made of Surlyn also has a solid core on the inside The positive aspects of getting golf balls covered with Surlyn are that they are fairly inexpensive, have a long life, and can travel far distances. On the other hand, these balls get less spin than others.

The other type of golf ball to look at is one that is made with Balata. Balata balls have liquid-filled cores. These cores are then bound together with rubber and covered with Balata - which is a fairly soft covering. Although a Balata covering can be nicked and cut up, it allows the ball to have more spin and backspin than otherwise usual. For you, this means more control over your golf ball. Despite its higher cost and shorter life on the golf course, it is a good choice of balls for experienced players.

Once you find the golf ball that is right for you, the only thing you will have to get nervous about is whether or not you should buy one case or two of them! More Golf Articles at http://eGolf-Today.com. Learn how to operate a Successful Adsense Website Network at http://eWebCreator.com. Matthew Hick has been designing profitable Niche Adsense Websites for over 5 years. Award winning Adsense Website Service at http://eWebCreator.com ]]> http://www.artwoo.com/article/five-star-world-cruise-cuisine http://www.artwoo.com/article/five-star-world-cruise-cuisine#comments Fri, 07 Nov 2008 10:01:27 +0000 fusion cuisinescelebrity chefscruise vacationsworld cruisestibetan foodgoing to hawaiiworld cruise http://www.artwoo.com/article/five-star-world-cruise-cuisine world cruises is going to be the food. In fact some of the best and most interesting cuisines are served up on these cruises. You can even go on five star world cruise vacations where the point is simply to explore the world and learn how to cook with one great chef who is a guest on board.

Cruise lines are becoming more aware of how attracted people are to celebrity chefs and learning new ways to cook and what better way to pack people on board than to turn the five star world cruises into a floating five star restaurant as well.

If you are on a diet a five star around the world cruise is probably not for you.(http://www.amttravel.com/cruise-lines/around-the-world-cruises.html)This is because you might be served as many as five meals a day. Aside from the regular lunch and dinner you will probably be served tea and a midnight buffet as well. If you get hungry in the middle of the night there is usually some kind of all night self service buffet located somewhere on the ship as well.

You can expect all different styles of foods and food presentations and for many different types of cuisine styles to be served. It is not uncommon at all for there to be French, Italian, Asian and Fusion cuisines available on board and created out of one kitchen. These are not your regular restaurant meals either.

Many of them are gourmet in flavor. It can also depend on the cruise line you are on. Exotic cuisines such as Indonesian, Pilipino or Tibetan food are currently very au courant on a five star world cruise as are the famous fusion cuisines from Miami, Florida and New Orleans.

Cocktails are also usually quite spectacular on these voyages and may be themed and named after wherever you are going. You can expect your martinis to be cleverly mixed together and to boast some elaborate and unusual garnishes. If you are going to Hawaii or Mexico Tikki themed cocktails are often served on this type of five star world cruise.
These trips can also be highly educational. You can also do things like learn how to make works of art out of food or how to make your own sculpture out of ice.

Aside from the usual dinners there is also usually some kind of special dinners. Almost every five star world cruise holds a final farewell Captain's Dinner to mark the end of the voyage. These are usually fantastic affairs that include delicacies like shrimp cocktail, Caviar, pate de fois grois, and classic surf and turf items such as racks of lamb, beef wellington, lobster thermidor, or broiled lobster tails.

Don't forget dessert if you attend one of these Captain's dinners. Typical offering include marzipan wrapped ice cream, Baked Alaska, cherries jubilee, and other amazing delights. It is a good thing that they have gyms on these five star world cruise ships or many people taking part in them would gain weight.Sarah Martin is a freelance marketing writer based out of San Diego, California. She specializes in travel and leisure and recently returned from a five star around the world cruise. For a great deal on a five star world cruise, please visit http://www.amttravel.com/.]]> http://www.artwoo.com/article/callaway-golf http://www.artwoo.com/article/callaway-golf#comments Wed, 03 Jan 2007 06:27:09 +0000 callaway golf clubscallaway golf companynew york stock exchangetongue in cheekbill gatesalice coopersynonymous http://www.artwoo.com/article/callaway-golf synonymous to the term Golf. It's hardly surprising, given the fact that Callaway Golf is the best known brand for golf equipment recognized worldwide. Callaway Golf company manufactures primarily golf equipment: golf clubs and golf balls. Over time, their market ventures included sports apparel, footwear, timepieces and watches and various assortments of accessories. The Odyssey brand, Top Flite brand and the Ben Hogan brand are also owned by Callaway Golf.

No one could ever forget how Mr. Ely achieved iconic status, or rather his first masterpiece the "Big Bertha". He was then a retired Burlington Industries Textile President with a big idea. The big idea was a cheap wooden driver inspiration which used to make his design which would later be realized as the Callaway Golf 's Big Bertha. After having acquired the services of Richard C. Helmstetter who was also a brilliant billiard cue designer, the Big Bertha was made. A marvel club at that time that showcase a 190cc steel club head that can hit the furthest and can hit even with minimal skill. The Callaway Golf Big Bertha completely revamped the existing golf clubs and set new standards for golf.

With a highly successful Product, Callaway Golf became public on the New York Stock Exchange.

Callaway Golf did brilliant publicity stunts too, to further its image line. For example when Bill Gates featured in the tongue-in-cheek commercial endorsement for the Callaway Golf Clubs, it was received with quite a reception. And Bill Gates isn't that great in golf (with a notoriously high handicap). Other celebrities and distinguished personalities with remarkable golfing feats also contributed to making Callaway Golf a household name, such as Alice Cooper and Celine Dion. Even Pro Golfers like Arnold Palmer and Gary Player are considered image line enhancements when Callaway Golf obtained the rights for their playing equipment.

While other emerging successes of the Callaway Golf product line like Fusion Fairway Woods, Wide Sole Irons, X-18 Irons, and several golf balls particularly the HX Series golf balls did garner some successes, the Big Bertha still remains the flagship for Callaway Golf. The Big Bertha Line already has several technology touches on the design feature. The latest is the Fusion FT-3 Driver which won several matches already; Phil in his 2006 Masters Victory and Annika Sorenstam who used and endorsed the Callaway Golf FT-3 Driver to several recent championship victories.

The most notable feature of the Callaway Golf Big Bertha is the shortened design of the traditional hosel length by several inches, allowing some weight to be shifted nearer the club head. This allows more weighty punch on the golf ball, multiplying power to an otherwise moderate swing. This highly marketable innovation was dubbed S2H2 (Short, Straight, Hollow, Hosel).

In short Callaway Golf has done wonders to improve many golfer's game. Learn how to play better golf from the Golf Guru. Guaranteed to cut 7 to 12 strokes off your game in just two weeks. Visit http://www.TheSimpleGolfSwing.jv101.com ]]> http://www.artwoo.com/article/history-of-ford http://www.artwoo.com/article/history-of-ford#comments Thu, 02 Oct 2008 00:29:25 +0000 mercury grand marquislincoln town carford escape hybridford f 150ford motor companyford lincolndearborn michigan http://www.artwoo.com/article/history-of-ford Ford Motor Company has been manufacturing cars since the early 1900s after its founder, Henry Ford, incorporated the company on June 16, 1903. Ford is the fourth largest vehicle maker in the world based on worldwide sales. They trail Toyota, General Motors and Volkswagon. The company is located in Dearborn, Michigan just outside of Detroit. Aside from their brands of Ford, Lincoln and Mercury, Ford also has international models in Sweden called Volvo and Mazda of Japan. They were once a part owner of Aston Martin in England. They sold their part ownerships of Jaguar and Land Rover to TaTa in India in March of 2008.

Ford is the third largest manufacturer in the United States in terms of sales behind GM and Toyota. It was the first time in 56 consecutive years that Ford had fallen from the number two largest manufacturer in the country. Henry Ford revolutionized the manufacturing world with his large-scale assembly line designs and how he treated his industrial workforce. His model for success became known globally as Fordism. The company has stayed within the Ford family for over 100 years.

Over the past few years the Ford Motor Company has struggled to make a profit and needed a new plan to revitalize the company. Company chairman Bill Ford requested a plan from Mark Fields, the president of the American Division. The plan was released to the public in 2006 and it was titled "The Way Forward." This plan did consist of major layoffs across the company and it resulted in the consolidation of production lines, the closing of 14 factories and cutting 30,000 jobs.

Ford has been one of the many motor vehicle manufacturing companies that has moved into producing hybrid cars and fuel flexible cars. Their fuel flexible cars are the Ford F-150, the Crown Victoria, the Focus, the Taurus, the Ranger, the Explorer, the Mercury Grand Marquis, and the Lincoln Town Car. Their hybrid vehicles have been produced every couple of years from 2004 to 2009. In 2004 the company released its Ford Escape Hybrid. In 2006 the company released its Mercury Mariner Hybrid, in 2008 the company released its Ford Fusion/Mercury Milan Hybrid and in 2009 it released the 2009 Ford Edge/Lincoln MKX Hybrid.

Ford, aside from manufacturing vehicles for everyday use, is also a major player in three of NASCAR's races. They manufacture cars for the Sprint Cup Series, the Nationwide Series and the Craftsman Truck Series. Their Ford F-150 is used in the Craftsman Truck Series and the mid-size Fusion is used in the Sprint Cup Series and the Nationwide Series.

One of the most popular and recognizable Ford cars is their ultimate sports car; the Ford Mustang. The Mustang was first manufactured in 1964 and released that same year at the New York World's Fair. The vehicle is modeled after the Ford Falcon, one of the company's compact cars. There are five generations of the Mustang, the fifth one beginning in 2005 and continuing into the present. The Mustang, not only the company's most popular car, is the company's most successful model as well.Portland Auto TransportMissouri Auto Shipment]]> http://www.artwoo.com/article/coldfusion-hosting-overview http://www.artwoo.com/article/coldfusion-hosting-overview#comments Thu, 06 Mar 2008 14:30:01 +0000 jsp java server pagesserver side languagejava server pagesjeremy allairemarkup languageactive server pagesscripting language http://www.artwoo.com/article/coldfusion-hosting-overview server side language used for scripting. It is similar to Hypertext Preprocessor (PHP) as well as ASP (Active Server Pages) applications.

The original version of ColdFusion was developed by Allaire under the supervision of JJ and Jeremy Allaire. Allaire was taken over by Macromedia in 2001.

Macromedia was acquired in 2005 by Adobe and development was stepped up.

In July 2007, Adobe released ColdFusion 8 and is now preparing the ColdFusion 8 updater 1 (known as ColdFusion 8.0.1) to be released in early 2008.

CFML (Cold Fusion Markup Language)

ColdFusion is primarily differentiated by the scripting language associated with it. This language is called CFML for Cold Fusion Markup Language.

This CFML looks like standard HTML in appearance and interfaces with JSP (Java Server Pages), ASP (Active Server Pages) and PHP (Hypertext Preprocessor).

Tags used in CFML are prefixed with cf in all instances. Such as cfparam or cffunction. CFML is considered to be a dynamic language.

However, tags that offer a type-check on parameters of user input must be specifically called out by the programmer. This can cause runtime failures and is the single negative I can see.

One of the greatest features of ColdFusion is its simple, tag-based scripting language called ColdFusion Markup Language or CFML.

What makes CFML great is that it's very easy for developers to learn because they are already used to working with tag-based HTML.

One of CFML's big characteristics is that it is case sensitive. Also, CFML uses dot notation to call components (objects) from a file and to pass messages between components.

Tags can have an opening and a closing tag, however CFML does allow for a "self closing" tag. An example of a self closing tag would be cfset value = "Welcome"/. Which version of tagging should be used is hotly debated.

CFML applications ColdFusion is primarily designed to be used with small, medium and large businesses. Some advanced personal uses could be possible as well.

Dynamic web sites with a fully integrated shopping cart, support on the back end for Flash interactivity and intranets are the most common uses of ColdFusion and CFML.

The web site applications are the intended design targets. These sites will be completely interfaceable with PDF, HTML, XHTML, DHTML and other document types prevalent on the Internet. Dynamic presentations and Flash applications are almost limitless.

As an intranet builder, large companies can program all their internal information as objects and code them into a file for later calling via "cfcomponent" tags.

This can make virtually any information available to all members of an intercompany network on an ongoing basis.

The ability of ColdFusion to create PDF files from standard HTML is a powerful addition. This is courtesy of Adobe since they have been overseeing the development since 2005.

The cost of ColdFusion hosting is generally a bit more expensive than standard hosting with Windows or UNIX.

This is due to the need for a ColdFusion server and engine. But with it's advanced features and shared server availability, this cost is presently very competitive.

The largest advantage of ColdFusion is the simplified coding for website development that would normally be extremely complex otherwise. Also the language is easy to learn in a server side environment. http://Alojate.com is the premier web hosting company in Mexico, offering a range or services for all business needs. http://www.alojate.com http://www.alojateextra.com http://www.actitudpublicitaria.com ]]>